Jul 26, 2010

Melchior's Mouse

I had a chance to stop in a great local fly-shop up in the North Suburbs the other day called Trout and Grouse. I like to swing in and bug the fine folks there. Paul Melchior is part of the team over there and has decades of fly-fishing experience drawn from all over the world. Paul runs Angling Escapes as well and specializes in creating destination fly-fishing experiences that have taken anglers all over the globe in search of everything from Steelhead to Bonefish to freshwater Dorado.

Paul showed me this mouse pattern and I was blown away. In fact, I tied one up immediately when I got home and have been waiting to see Paul's final version. Paul explains in his own words below:
---------------------------------------------------

I have been a mouse “fan” for many years and have caught trout, bass, etc with them not only on local trout streams but in distant fisheries like Argentina and Chile as well.

I was thinking about the traditional deer hair mice and while they look realistic, because so many are trimmed in the front, tend to dive when they get wet.  That’s not how a mouse swims…they hold their head high, with their body submerged.  I know the Morrish Mouse is quite a popular pattern, with the foam on the top but I thought the design was backwards…the foam should prop up the body from underneath, with the hair creating the profile, and thus my pattern was born.  My first version used just one layer of foam, with the second generation using two layers for greater floatation and a bit more rigidity at the front.

The fly can be swum steadily, pulsed back and even popped a bit.  One or two false casts dries off the hair quickly and the fly floats high and lands correctly each time.  I use a Tiemco 8089 hook so I have a nice wide gap, which I think is vital in getting good hook sets, often on very aggressive strikes.  I use a heavy thread, Flymaster 210 for tying the fly so I can be sure to pull as hard as I want on each bunch of deer hair and also really crimp the foam at the front of the fly.  Clearly GelSpun thread is as strong but tends to cut materials when pulling too hard while the 210, being wider, has more cushioning effect.

Future versions might include some sort of rubber legs out to the side.  I have always been skeptical about tails on mice patterns ever since several Alaskan guides, who fished mice all summer, noted that trout tended to grab the tail and try to drown the real mice (really a lemming in Alaska) rather than eat it whole.  I have never noted any lack of success on patterns without tails.

Paul

Jul 25, 2010

Tying Mike's Mousekeeteer / Will ties the "Gurgleteer"

Getting excited about the prospects of some serious night fishing in a couple of weeks I have been tying up some big trout munitions. I really liked Mike Schmidt's Mouseketeer which was posted on both sites a little bit ago so I dressed a few. Showing my little brother my rendition he pulled one of them out of the box by the tail, holding it just far enough away from his face that it would not be able to bite him. After staring at it for a few moments, he turned to me with a look of disgusted incredulity and said, "I have no idea what this thing is, but it looks like a mutant beetle-capiller."

We discussed the pattern and night fishing for a little while afterwards and came to the conclusion that we are extremely excited to throw them in the darkness and are very appreciative for Mike introducing it to us.

I took the Mouseketeer and really ran with it. And by ran with it I mean that I tied the fly the exact same way, and then added a bunch of rubber legs. Call me an innovator.


I have also been tying a non-articulated pattern. It is another version of the venerable Gartside Gurgler.

It is tied on a size 2 TMC 8089 with a size 8 octopus hook dropped off the back with furled 20lb Maxima. Some people may disagree with a stinger, but I have also been told that big trout have been known to drag varmints underwater by their tails. So I figure, if a leviathan grabs the tail of my fly, I would prefer that tail to have a hook.


The tail is a marabou on top of some bucktail. The back and head is 3/8" evasote foam, the body is palmered schlappen, and the legs are rubber. Gurgler and Mouseketeer inspired. A Gurglerketeer. Yeah, I don't think that name is sticking.

--Will Parke (---Read more about Will's exploits at his home blog: The Chicago Trout Bum---)

Jul 19, 2010

Matt Puts a Mouse Trout On The Board

My friend Matt knows that mousing raises big fish... and small ones too. Night mousing is a productive method and this time of year, it will raise fish both big and small. Matt and I were talking the other day about how crazy it is that some of these smaller year class trout jump on a meal like a giant mouse pattern. Matt was tossing a black modified gurgler to these fish. If you zoom in on the photo, he has a similar fly pinned to his vest. Thanks for the submission Matt.

Night Mousing Clinic With Hawkins Outfitters

Waking up the Night
July 31st, 2010

Arguably one of the most exciting and reliable ways to target “Trophy Class Trout” today is fishing at night with surface flies. Join Hawkins Outfitters this summer and learn more about the popular technique commonly referred to as “Mousing”. This class will cover everything from fly selection to fly presentation. We will discuss rod and line selection, rigging, fly presentation, casting safety with large flies, and reading water. Physical factors such as temperature and moon phase can also be critical to your success and we will cover these aspects as well. This class is designed for the intermediate to advanced angler and some casting experience will be required to benefit from this course. The “night time is the right time” and Big Trout can often be caught off their guard when the lights go out. I suspect a couple of trophies will be blinded by our flashing lights during this course! This class will be taught on either the Pere Marquette or Manistee Rivers. The cost of the school is $200/ person.

Jul 17, 2010

McNeil's Mad Mouse

I'm trying to track down the tier behind this sharp looking mouse pattern. I've linked the photo back to the site where I found this. If you're out there Mr. McNeil, we'd love to hear from you. I dig the knotted rubber legs.

Check out the site I pulled this down from: Manic Tackle Project

Hawkins Outfitters - Tommy Lynch Mouse Tying Demo Pt 1.

Jul 14, 2010

Mike Schmidt's Mouseketeer

Mike Schmidt of Angler's Choice Flies is an Ohio based tier and angler who is breaking new ground with his innovative fly-tying. Mike and I began corresponding a little while back. Mike was kind enough to send over a full step-by-step of his Mouseketeer fly. Enjoy the step by step and be sure to tie a Mouseketeer up for your next trip.

Recipe:

Thread: UTC140, black
Hook: Gamagatsu B10S size 2 and 4
Tail: Round rubber legs, black
Body1: Evasote sheet foam (1/8"), black
Body2: Schlappen, black
Body3: Medium foam tube, black (optional)
STEP 1: With your Gamagatsu B10S size 4 in the vise, get your black 140 denier thread started at the head and then wrap back down the hook a few wraps to secure it in place.
STEP 2: Take three connected pieces of black round rubber legs to form the mouse tail. Tie them in hanging off the back of the hook three to four inches and finish with your thread at the rear tie in point located half way between the hook point and the barb.
STEP 3: Cut a 3/4" wide strip of 1/8" thick evasote foam. Tie in the strip of foam securely with your thread ending up back at the rear tie in point.
STEP 4: At the rear tie in point secure a black schlappen feather by the tip then palmer it forward eight to ten wraps up to the head of the rear hook.
STEP 5: Split the fibers as evenly as you can down the hook shank and then pull the foam strip forward to the eye. Once you have a tight couple of wraps cut the strip off soyou can see the eye and then finish securing it with a few more wraps and a whip finish right behind the hook eye.
STEP 6: Place your Gamagatsu B10S size 2 in the vise and secure the rear of the fly using a two inch piece of 30lb Fireline. Wrap tightly up and down the shank twice with a dot of Zap a Gap to ensure the rear hook is not going anywhere.
STEP 7: Cut a arc in to another piece of foam and securely attach it at the rear tie in point. The arc should extend back and cover the eye of the rear hook. Doing so allows the hooks to swivel but keeps a solid profile from below.
STEP 8: Just in front of the foam tie in another schlappen feather and palmer it forward. Be sure to leave a bit over 1/8" of space to the hook eye then tie it off and clip.
STEP 8B: (OPTIONAL) If you are fishing faster water or simply want the pattern to sit just a little higher in the water then you can do so by adding a bit more foam to the front hook. After you tie in the schlappen then secure a piece of 1/8" evasote foam tubing. Prepare the tubing by cutting it to length and cut a slit down the length of the piece to allow it to form around the hook. Once the tubing is tied in the palmer the feather forward over the tubing.
STEP 9: As you did on the back hook, split the fibers as evenly as you can down the hook shank and then pull the foam strip forward towards the eye and secure the foam with half a dozen wraps.
STEP 10: Force a fold in the foam and tie it down just behind the eye. This piece of foam will push a significant amount of water and give you a nice big wake to attract fish.
From above you can see it really looks more like a nuclear enhanced ant…but in the water at night it holds a solid silhouette against the sky and pushes a lot of water around. Tied correctly this fly tracks like a charm and is extremely durable. When I fish this pattern I am using heavy tippet to help control both the fly and whatever eats it, and attach it using a Jam Knot as I do on most all my streamers. Tie some up and get them wet!

---------------------------------
Thanks for the great step-by-step on your Mouseketeer Mike. You can find Mike Schmidt's patterns online at Angler's Choice Flies. Mike lives in Ohio and fishes widely in the Midwest.

The Gartside Gurgler

Jack Gartside's famous creature pattern, the Gartside Gurgler, has become a true favorite for raising big fish, whether in salt or fresh water. My friend Will likes to tie this fly in a variety of dark colors for use on local trout streams. The Gurgler's foam lip pushes water and throws a perfect v-shaped wake and draws vicious strikes. Check out this step by step on the Jack Gartside website. Gartside passed on not too long ago, but his contributions to the sport live on every time we tie or fish one of his infamous patterns.

This salient point's of this pattern such as over-wrapped foam and semi-circle lip at the head of the fly re-appear in many of the popular mouse patterns we tie today. I'm going to peel away from the keyboard right now and tie a few of these guys up.

Jul 12, 2010

Mouse Fishing Pictures from Charles

Angling friend Charles Weary sent me this shot of a nice german mouse-eater. Of course the man who throws a fly called the mud-puppy for Musky would mouse fish spring creeks. Thanks for the picture bud. Charles has tied into numerous Musky this season, landing several on his signature mud-puppy pattern. When we going fishing?

Jul 10, 2010

Even little trout eat mice. - Mouse Fishing Report

The fishing the other night was tough, but we managed to roll a few fish here and there. Joe and I expected the night fishing to be stellar. On our Wisconsin spring creeks, we like warm muggy nights for tossing the mice. Things just seem more electric when the air feels like soup and the grasses and forest come alive with sound. It's just plain spooky out there on a moonless night. The farm dogs showed up at the pools we fished as usual. Friendly, but mangy. In any case, they just sit and scratch while we take turns throwing mouse patterns up and downstream.

In the end, we rolled a few fish which was plenty of excitement. The creek still had a significant stain, but I'm not sure that it matters when it comes to this sort of night fishing. I only managed to land one little trout. I am constantly amazed at the size of fly that a hungry little Brown Trout will eat. This time it took one of my foam/rubber legged creations I call the "Driftless Creature".

Matt Delorenzo's Scuba Mouse - Mouse Fly Pattern

This is the my good friend Matt Delorenzo's "Scuba Mouse". This pattern is fished much like a Dahlberg Diver and pushes some serious water triggering dramatic and violent strikes. But the articulation in the pattern offers superior hooking power and means more monsters brought to the net. Articulated patterns like this one Matt dreamed up also are far more gentle on the fish as the joint between the two parts of the fly eliminates the levering and tearing that can occur on a larger "stinger" style hook.

Check out Matt at Upland Outfitters and Jones Outfitters. He lives and fishes in the Adirondacks of Upstate New York.

Jul 5, 2010

Welcome to Haus of Mouse

Haus of Mouse is a blog devoted exclusively to those fly-fishermen who like to strike out in the darkness of night. This site will serve as your night-fishing portal. Find new, innovative mouse patterns, informative expert articles and custom tied mouse and rodent patterns from across the country available for purchase. We welcome any and all mouse or night fishing pictures, catch reports or stories.

Len Harris Goes A Mousin... - Driftless Mouse Trout

Len Harris hit the water early this morning with his good fishing friend Joe Chadwick. Joe landed this creek pig on a Whitlock Mouse. Frankly this picture speaks for itself.